This product is on 
because of
Avoiding risk of heat stress or cold-related illnesses
Low or No VOCs (volatile organic components) or nasty chemicals
Good insulation for well regulated room temperatures
Zinacore™, a roofing product is made up of a hot dipped aluminium/zinc alloy coating over a steel substrate. It is designed for colour retention and formability. The substrate is coated to 150gms/m2 coating weight and manufactured to AS 1397:2011 standard. It is ideal for benign to moderate (C1-C3) atmospheric conditions.
The product is pre-treated with a corrosion resistant chromate conversion coating and primed with a flexible corrosion resistant chromated primer with nominal film thickness of 7μ± 1μ on the top side and 5μ±1μ on the reverse. The finish is completed with a flexible exterior acrylic, polyester or modified coating.
Main features
- GreenRate Level A (Global GreenTag)
- Low VOC
- No toxicity
15 years
42 years
Global warming potential(A1-A3)
13.9 kgCo2-Eq of embodied carbon per 1m2 of ColorCote® AlumiGard™ 0.7mm thick manufactured.
Global Warming Potential(A4)
Not declared
Total Global Warming Potential
13.9 kgCo2-Eq
Not applicable
A recycling rate of 89% is assumed
- Mar Resistance: Good Scratch Resistance: Good
- Impact Resistance: (AS/NZS 2728 Appendix E) – Greater than 10 Joules
- Pencil Hardness: (AS/NZS 1580.405.1) – F minimum
- Bend Test: (AS/NZS 2728 Appendix F) – No loss of paint adhesion when bent around a diameter equal to five times the thickness of the sheet.
- Heat Resistance: Suitable for continuous service up to 100C. Continuous service at higher temperatures may cause some colour change of the paint film.
