TankMate R3 Tank Level Sensor - LTE (Telstra)

TMR3L-AU
$599.00
In stock

Minimum quantity for "TankMate R3 Tank Level Sensor - LTE (Telstra)" is 1.

+

Suppliers follow Australian Consumer Law and may offer warranties and refunds. Evitat does not control Supplier policies but values customer experience. Please refer to supplier refund policies. Contact us if you cannot resolve an issue with the Supplier.

This product is on because of

Support local manufacturing, and new innovations

Reducing water consumption and provides a natural source for gardening

Lower water bills with grey water and rainwater

Includes sensor, 12 months connectivity + premium app features!
The cellular version of our advanced R3 sensor is almost here, due to be released in early October 2022. And with a Telstra-network SIM built in at factory and all data for the first year included, you can just set and forget!

It provides accurate and affordable tank level monitoring anywhere there is Telstra coverage, using the dedicated low power, wide area NB-IoT network. The fully sealed sensor unit uses a non-contact radar sensor to measure tank levels with millimeter accuracy, to ensure years of trouble free operation.


Our R3 sensors are housed inside a robust polycarbonate enclosure with an IP68 weatherproof rating to ensure it can stand up to the elements. Powered by 3 x AA Lithium batteries, the sensor requires no external power and provides intelligent battery monitoring via the mobile app.

This sensor can be used with a variety of tank types and shapes - installation requires a 30mm hole to be drilled in the tank lid / roof (at least 100mm above the water height). A single sensor can be used to monitor multiple tanks that are connected and have a common level.

Access your tank data online with the TankMate app for mobile (iOS & Android).
TankMate LTE Annual Subscription required - $79 / year (first 12 months included with purchase.) Includes cellular connectivity & data plus all Premium app features.

Note: Cellular connected product - ensure your tank has Telstra network coverage. iOS or Android mobile app required for initial set up.

Width:
150mm
Depth:
68mm
Height:
42mm

- LTE (cellular) connectivity over Telstra NB-IoT (see link to Telstra coverage map below)
- Durable polycarbonate enclosure: IP68
- Size: 150 x 68 x 42mm (including mounting tabs)
- 1mm sensor resolution
- Simple installation - no calibration required
- >30mm hole required for installation on a tank
- Power: 3 x AA 1.5v batteries (included)
- Up to 3 years battery life* with Energizer Ultimate Lithium batteries (included)
- 24 month return to base warranty

*Typical battery life, with data published twice per day. Poor signal quality may further reduce battery life.

Telstra NB-IoT coverage map (ensure you select NB-IoT under Type of coverage)

Telstra NB-IoT Map

Play installation video

Similar products

$449.00