Cart is empty

ColorCote® AlumiGard™ 0.9mm

Price on request
mm
Out of stock

Minimum quantity for "ColorCote® AlumiGard™ 0.9mm" is 1.

Suppliers follow Australian Consumer Law and may offer warranties and refunds. Evitat does not control Supplier policies but values customer experience. Please refer to supplier refund policies. Contact us if you cannot resolve an issue with the Supplier.

This product is on because of

Avoiding risk of heat stress or cold-related illnesses

Low or No VOCs (volatile organic components) or nasty chemicals

Good insulation for well regulated room temperatures

  • View all variations as list

AlumiGard™, a roofing product is made of marine grade aluminium alloy. It is designed to be used in the most severe environmental condition (atmospheric classification C1-C5l and C5M). The substrate is an aluminium alloy type 5005 OR 5052 marine grade, H34 or H36 temper.

The product is pre-treated with a corrosion resistant chromate conversion coating and primed with a flexible corrosion resistant chromated primer with nominal film thickness of 7μ± 1μ on the top side and 5μ±1μ on the reverse. The finish is completed with a flexible exterior acrylic, polyester or modified coating.

Finish Coat:
Acrylic or polyester system.
Color:
Ironsand

Main features

Product Certifications:
  • GreenRate Level A (Global GreenTag)
Sustainability features:
  • Low VOC
  • No toxicity

≥15 year warranty

80 years

Global warming potential(A1-A3)

42.6 kgCo2-Eq of embodied carbon per 1m2 of ColorCote® AlumiGard™ 0.7mm thick manufactured.

Global Warming Potential(A4)

Not declared

Total Global Warming Potential

42.6 kgCo2-Eq

Not applicable

Environmental Product Declaration

A recycling rate of 89% is assumed

GreenTag GreenRate Level A

Brochure

  • Mar Resistance: Fair
  • Scratch Resistance: Fair
  • Impact Resistance: (AS/NZS 2728 Appendix E) – Greater than 10 Joules
  • Pencil Hardness: (AS/NZS 1580.405.1) – F minimum
  • Bend Test: (AS/NZS 2728 Appendix F) – No loss of adhesion or paint cracking when bent around a diameter equal to five times the thickness of the sheet.
  • Heat Resistance: Suitable for continuous service up to 1000C. Continuous service at higher temperatures may cause some colour change of the paint film