This product is on because of
Materials with low environmental cost
Low or No VOCs (volatile organic components) or nasty chemicals
Dulux UltraAir® Interior Walls Matt is an ultra-low chemical emissions*, ultra-low odour premium water-based paint. Proven to emit fewer chemical emissions*, Dulux UltraAir® maintains your indoor air quality. It is a whole-of-home product that is recommended for use in conjunction with Dulux UltraAir® Interior Primer and Dulux UltraAir® Ceiling White to achieve an ultra-low chemical emissions system. Dulux UltraAir® is GREENGUARD Gold certified and Global GreenTag™ GreenRate™ Level A and PlatinumHEALTH™ certified. Dulux UltraAir® can contribute to the achievement of Green Star and WELL project certifications. So take a deep breath, relax and enjoy your great indoors.
Product highlights
- Ultra-low chemical emissions*
- Ultra-low odour
- Get back into your room sooner
- Helps maintain indoor air quality
- Available in Vivid White™ base only
- Premium quality Dulux paint that lasts
- Lasting finish
Additional info
Currently not available
Currently not available
Global warming potential(A1-A4)
0.44 kgCo2-Eq of embodied carbon per of 4L tinplate packaging manufactured and distributed.
Currently not available
We have assumed 100% of the paint ends up in landfill
Application guide
Application tools | Brush, Roller, Spray |
Cleaning materials | Water |
Touch dry | 30 minutes |
Re-coat time | 2 hours |
Surface preparation
Surface must be clean, dry and free from dust, oils and grease. Fill cracks or holes with a flexible filler. Spot prime repairs with Dulux UltraAir® Primer. Glossy surfaces: Lightly sand to a dull finish. Unpainted plasterboard, brick, cement sheet: One coat of Dulux UltraAir® Primer. Bare timber: One coat of Dulux UltraAir® Primer. For tannin rich timber use Dulux 1Step® Oil based Primer, Sealer & Undercoat^. For set plaster, fibrous plaster, plasterglass: One coat of Dulux PRECISION® Sealer Binder^. ^Note – Chemical emissions will not be ultra low if this product is used under Dulux UltraAir®.
How to apply
Surface must be clean, dry and free from dust, oils and grease. Stir paint thoroughly with a flat paddle using an up-and-down scooping action. Cut-in around the edges with a brush, then roll up to the border whilst it is still wet. Apply two coats ensuring that the first coat is completely dry before applying the second. Note: Some colours may require more than two coats, especially when painting over dark colours.
Responsible disposal of paint
Unused paint: Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper and allowed to dry, and then disposed of via domestic waste collections. Empty paint containers: Leave empty paint containers open in a well-ventilated area to dry out. When dry, recycle the container via steel can recycling programs. Disposal of empty paint containers via domestic recycling programs may differ between local authorities. Check with your local council first. Do not reuse container unless thoroughly decontaminated. For more information on responsible disposal of paint and packaging visit paintback.com.au or painttakeback.co.nz